NFPA 25 Compliance: Leak Detection Services for Water-Based Fire Protection Systems in BC

 🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.

NFPA 25 Compliance: Leak Detection Services for Water-Based Fire Protection Systems in BC

Water-based fire protection systems are among the most effective tools for mitigating fire damage in commercial, industrial, and institutional buildings. However, these systems are only as reliable as their maintenance and inspection protocols. Under NFPA 25, the National Fire Protection Association’s standard for inspection, testing, and maintenance (ITM), regular evaluation of these systems—including leak detection—is not just a best practice, but a legal and life-safety requirement in British Columbia.

At AnyLeak.ca, we provide specialized leak detection services aligned with NFPA 25 for sprinkler systems, standpipes, fire pumps, and other water-based fire suppression systems. Our licensed technicians support property owners, facility managers, strata corporations, and municipal authorities across BC in maintaining NFPA compliance and preventing failures that could result in catastrophic loss or liability.

What Is NFPA 25?

NFPA 25: Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems is the definitive guide used across North America to ensure that sprinkler systems, standpipes, private fire hydrants, and fire pumps function properly when needed.

Adopted and enforced by municipal fire authorities, insurance providers, and Technical Safety BC, NFPA 25 outlines:

• Frequencies for inspections (weekly, monthly, quarterly, annually)
• Procedures for system testing (e.g., flow tests, hydrostatic testing)
• Standards for component condition and functionality
• Requirements for leak detection and corrosion monitoring
• Recordkeeping and documentation compliance

Why Leak Detection Is Critical in NFPA 25 Compliance

While fire suppression systems are designed to activate during priority cases, unnoticed leaks in sprinkler pipes, fittings, or valves can lead to:

• Reduced system pressure or flow, rendering the system ineffective
• Corrosion and mechanical failure
• Water damage to building interiors
• False system activations
• Non-compliance fines or insurance disqualification

NFPA 25 Section 4.1.5 specifically requires property owners to ensure the system is maintained in proper operating condition, which includes identifying and mitigating any leaks or water loss that could compromise performance.

Our NFPA 25-Aligned Leak Detection Services in BC

At AnyLeak.ca, we offer specialized, non-invasive leak detection for all types of water-based fire protection systems, from small business offices to high-rise towers and industrial complexes.

Systems We Inspect for Leaks:

• Wet pipe sprinkler systems
• Dry pipe sprinkler systems
• Pre-action and deluge systems
• Standpipes and fire hose cabinets
• Fire pumps and controllers
• Private underground fire lines
• Backflow preventers and PIVs

Our Leak Detection Technologies & Methodologies

We use a blend of visual inspections, non-destructive testing, and high-sensitivity diagnostic tools to detect leaks that may otherwise go unnoticed during routine fire inspections.

1. Acoustic Leak Detection

• Utilizes ground microphones and ultrasonic sensors
• Ideal for pressurized underground fire lines or concealed piping
• Detects minute vibrations from water escaping under pressure

2. Infrared Thermal Imaging

• Identifies hidden moisture and pipe sweating
• Detects leaks behind walls, ceilings, or slab penetrations
• Common in multi-tenant buildings where wet systems are embedded

3. Hydrostatic Testing Support

• Assists in pinpointing system failures during mandatory hydrostatic pressure tests
• Identifies fittings or joints that fail under elevated pressure

4. Moisture & Pressure Monitoring

• Deploys digital sensors and gauges to detect pressure drops
• Supports flow tests and maintenance procedures

5. Tracer Gas Detection

• Uses nitrogen or helium gas to safely pressurize empty systems
• Detects micro-leaks in dry systems without water exposure

Property Types We Serve Across BC

Our NFPA 25 leak detection services are tailored to meet the unique needs of:

Commercial Properties

• Retail malls, strip plazas, and offices
• Sprinklered mechanical rooms and ceiling voids
• Rooftop dry pipe systems and parking garages

Industrial Facilities

• Warehouses, plants, and logistics centres
• Hazardous materials zones with deluge systems
• Multi-zoned dry/wet system hybrids

Multi-Unit & High-Rise Buildings

• Strata-managed condominiums and apartments
• Sprinklered residential hallways and in-suite protection
• Fire pump and backflow equipment rooms

Government & Municipal Facilities

• City halls, schools, community centres
• Water-based protection for IT/server rooms and libraries
• Underground fire mains and hydrant branches

Healthcare & Education

• Hospitals and assisted living centres
• Colleges, universities, and dormitories
• Dry pipe systems in critical infrastructure zones

Common Leak Risks in BC Fire Protection Systems

Given BC’s varied climate, aging infrastructure, and increasing urban density, the following leak risks are common:

• Corroded steel pipework in aging buildings (Vancouver, Burnaby, Victoria)
• Frozen pipe damage in dry systems (Interior BC, Whistler, Kelowna)
• Shifting soil and seismic activity causing underground pipe cracks (Richmond, Nanaimo)
• Construction damage to embedded sprinkler pipes
• Incorrect system pressure due to pump or valve failure
• Improper drain valve shutoff after annual tests

We routinely help clients identify leaks missed by standard fire inspections, preventing insurance disputes and compliance fines.

When Should Leak Detection Be Performed?

NFPA 25 specifies inspection frequencies, but leak detection is especially recommended:

• Annually, as part of routine NFPA inspections
• After any seismic activity or major construction near fire lines
• If pressure loss or system alarm occurs
• Before hydrostatic testing
• During due diligence for commercial property acquisition
• When corrosion, rust staining, or water damage is visible

Reporting & Documentation You Can Trust

We provide formal inspection reports, including:

• Summary of findings (location, severity, risk)
• Infrared or acoustic imagery
• Moisture and pressure data
• Compliance references (NFPA 25 sections)
• Repair recommendations and urgency rating
• Follow-up support for re-testing

These reports can be used for:

• Insurance claim support
• Strata council documentation
• Fire marshal review
• Maintenance planning and budgeting

Local Expertise in All Regions of British Columbia

Our technicians serve all major urban and remote areas of BC, including:

• Vancouver & Burnaby – high-rise and underground parkade systems
• Surrey & Delta – warehouse, logistics, and commercial zones
• Richmond & New Westminster – floodplain fire line monitoring
• Coquitlam & Port Moody – condo and mixed-use building leak detection
• Langley & Abbotsford – industrial sprinkler zone analysis
• Kelowna & Kamloops – dry pipe and underground detection
• Victoria & Nanaimo – municipal infrastructure and heritage buildings
• Whistler & Squamish – resort property winterization support

Why Choose AnyLeak.ca for NFPA 25 Leak Detection?

• Over 20 years of experience with fire suppression system diagnostics
• Fully licensed and insured leak detection specialists
• Compliant with NFPA 25, BC Fire Code, and local AHJ requirements
• Non-invasive, fast, and cost-effective testing
• Trusted by fire protection contractors, building owners, and insurance firms

Whether you operate a shopping centre, manage a hospital, or own a warehouse, we help ensure your fire protection system is safe, code-compliant, and leak-free.

🔥 Frequently Asked Questions – NFPA 25 Compliance & Leak Detection for Fire Protection Systems in BC

What is NFPA 25?
NFPA 25 is the National Fire Protection Association’s standard for the inspection, testing, and maintenance (ITM) of water-based fire protection systems.

Is NFPA 25 compliance required in BC?
Yes. NFPA 25 is adopted by reference in BC fire codes and enforced by local fire departments and authorities having jurisdiction (AHJs).

Which systems fall under NFPA 25?
Sprinkler systems, standpipes, fire pumps, valves, water storage tanks, and backflow prevention assemblies.

Why is leak detection important under NFPA 25?
Leaks can compromise system pressure, delay activation, and cause water damage—making regular detection critical for life safety and code compliance.

Does AnyLeak.ca provide NFPA 25-compliant leak detection services?
Yes, we specialize in non-invasive leak detection aligned with NFPA 25 for all water-based fire suppression systems.

How often must leak detection be conducted under NFPA 25?
Annually at a minimum, though certain components like fire pumps or valves may require more frequent testing.

Who enforces NFPA 25 in British Columbia?
Local fire departments, fire inspectors, and Technical Safety BC enforce compliance based on municipal bylaws and provincial codes.

Do you service high-rise buildings in Metro Vancouver?
Yes, we provide leak detection and NFPA 25 inspections for high-rises across Vancouver, Burnaby, Surrey, and beyond.

Can you detect underground fire main leaks?
Yes, we use acoustic, pressure, and tracer gas testing to detect leaks in buried mains and loop systems.

Do leaks in fire protection systems impact insurance?
Yes. Failure to maintain a leak-free system may void insurance or reduce claim payouts after a fire event.

Do you test for corrosion-related leaks in sprinkler piping?
Yes, internal corrosion and MIC (microbiologically influenced corrosion) are common causes of pinhole leaks we detect.

Is NFPA 25 applicable to warehouses and industrial facilities in BC?
Yes, all commercial and industrial buildings with water-based systems must follow NFPA 25 standards.

What types of leaks can occur in a sprinkler system?
Common leaks occur at pipe joints, corroded fittings, control valves, risers, test ports, and main drains.

Do you inspect backflow preventers for leaks?
Yes, backflow prevention devices must remain leak-free and operational under NFPA 25 standards.

Can you inspect and detect leaks in dry pipe or pre-action systems?
Yes, we test both wet and dry water-based fire protection systems.

Do you inspect fire department connections (FDCs) for leakage?
Yes, FDCs are critical components that must remain sealed until activated during an priority.

Are your technicians certified for NFPA inspections?
Yes, our technicians are trained in NFPA 25 protocols and certified for testing and leak detection.

Can you provide documentation for AHJ or fire marshal inspections?
Yes, we issue detailed, compliant reports accepted by fire inspectors across British Columbia.

What tools do you use for leak detection in sprinkler systems?
We use ultrasonic acoustic sensors, infrared thermography, pressure gauges, and moisture mapping tools.

Do you inspect fire pumps for internal leaks?
Yes, fire pumps are checked for casing leaks, packing gland leaks, and valve integrity.

Can a fire suppression system leak without activating?
Yes, small leaks can occur from corrosion, improper sealing, or temperature fluctuations without system discharge.

How long does a typical leak detection inspection take?
2 to 4 hours on average, depending on the size and complexity of the system.

Do you work with fire system contractors or engineers?
Yes, we collaborate with sprinkler fitters, building engineers, and FSRs to ensure full system compliance.

Can leaks cause sprinkler zones to lose pressure?
Yes, even minor leaks can depressurize a zone and compromise response time during a fire.

Do you test for pressure decay in standpipe systems?
Yes, we conduct hydrostatic and air pressure decay testing in accordance with NFPA 25.

Can you inspect fire protection systems in hospitals or healthcare buildings?
Yes, we work discreetly in medical environments to meet healthcare-specific fire safety standards.

Do you offer service across Vancouver Island?
Yes, we serve Victoria, Nanaimo, Courtenay, and other Vancouver Island municipalities.

Do leaks in fire systems cause mold or structural water damage?
Yes, slow leaks often lead to mold growth and building envelope deterioration if left untreated.

Can you test tenant units in strata buildings for fire system leaks?
Yes, we perform unit-by-unit testing when leaks are suspected behind walls or in ceilings.

Are fire protection systems required to be leak-free at all times?
Yes, NFPA 25 mandates that systems remain operational and free of leaks that impair performance.

Do you test wet and dry risers for leaks?
Yes, we inspect and test risers regardless of system type, building height, or use case.

Can you assist in resolving red-tag violations related to leaks?
Yes, we help identify the source of non-compliance and provide documentation after repair.

Do you offer NFPA 25-compliant leak detection in educational facilities?
Yes, we test fire systems in schools, colleges, and universities across BC.

Can leaks develop in fire sprinkler heads themselves?
Yes, defective or corroded heads can drip or weep under normal pressure conditions.

Do you check water storage tanks for leaks or level drops?
Yes, NFPA 25 requires regular tank inspections, which we provide with leak detection services.

Do you test fire protection systems during renovations or retrofits?
Yes, we recommend re-inspection after any construction that may impact fire systems.

Can a leaking standpipe be dangerous during a fire?
Yes, any pressure loss reduces firefighting effectiveness and delays fire suppression.

Do you provide after-hours inspections for facilities?
Yes, we accommodate off-hours scheduling for hospitals, airports, data centres, and others.

Can a building be shut down for failing NFPA 25 compliance?
Yes, fire inspectors may order system shutdowns or occupancy restrictions until violations are corrected.

Do you inspect PRVs (Pressure Reducing Valves) for leaks?
Yes, we test PRVs as part of the full NFPA 25 maintenance protocol.

Is leak detection covered in the annual NFPA 25 inspection?
Yes, annual inspections must check for visible and suspected leaks throughout the system.

Do you inspect seismic bracing and supports for water system leaks?
Yes, displaced or loose bracing can stress pipes and cause leaks at joints or anchors.

Can a slow leak in a sprinkler pipe become a rupture?
Yes, pressure, corrosion, or freeze damage can escalate minor leaks into full breaks.

Do you help building owners prepare for a fire inspection?
Yes, we conduct pre-inspections and leak checks to help properties pass fire department reviews.

Do you test concealed fire sprinkler piping behind walls and ceilings?
Yes, we use thermal and acoustic tools to detect hidden leaks without cutting drywall.

Can your service reduce the cost of insurance premiums?
Yes, maintaining NFPA 25 compliance and leak-free systems may qualify you for insurance discounts.

Do you inspect fire protection systems in retail or shopping centres?
Yes, we test fire suppression networks in malls, outlets, and multi-tenant retail sites.

Do you test post-indicator valves (PIVs) for leaks?
Yes, PIVs are checked for operability and leakage as part of main line inspections.

Can you detect leaks in vertical zones of high-rise buildings?
Yes, we are equipped for multi-floor system testing and leak tracking in high-rise applications.

Do you inspect drain valves and test ports for leakage?
Yes, we check all valves and drains for signs of corrosion, drip, or failure.

Can sprinkler leaks cause nuisance alarms or monitoring issues?
Yes, low pressure or false activations due to leaks can trigger alarm systems improperly.

Are NFPA 25 inspections the same as a fire alarm test?
No, NFPA 25 covers suppression systems, while fire alarm inspections follow separate standards.

Do you test antifreeze systems for leaks and NFPA compliance?
Yes, we inspect specialized systems including those using antifreeze or foam additives.

Can you test private hydrants for leakage or pressure loss?
Yes, private on-site hydrants are part of the NFPA 25 inspection scope.

Do you provide leak detection after a fire event or accidental discharge?
Yes, we inspect post-incident systems to detect damage-induced leakage or rupture.

Do you support facility managers with compliance reports and logs?
Yes, we supply all required ITM documentation to maintain inspection records.

Is leak detection required for five-year sprinkler system testing?
Yes, five-year inspections include internal assessments where leaks and corrosion must be addressed.

Do you test systems after freezing weather?
Yes, freeze-thaw cycles can cause pipe damage—especially in attics or exterior zones.

Do you inspect tamper switches and flow switches for proper function?
Yes, these devices must trigger correctly under NFPA 25 protocols, and leaks can impair them.

Do you provide thermal imaging to detect hot or cold water leaks?
Yes, we use FLIR technology to detect temperature anomalies caused by leaks.

Do you work with fire safety consultants for new developments?
Yes, we support engineering teams with compliance testing during commissioning phases.

Do you test diesel or electric fire pump systems?
Yes, we test pumps and controllers for integrity, performance, and leak-free operation.

Can you isolate zones to test specific areas for leaks?
Yes, we isolate sprinkler zones or risers for targeted diagnostics without shutting down the entire system.

Do you inspect in-rack sprinkler systems for leaks in warehouses?
Yes, we inspect high-rack and cold storage fire suppression systems across BC.

Do fire sprinkler leaks require immediate repair under NFPA 25?
Yes, all leaks—regardless of size—must be corrected promptly to maintain operational integrity and compliance.

Can corrosion cause internal pipe leaks in fire systems?
Yes, internal corrosion, especially from MIC, is a leading cause of undetected pipe failure.

Is leak detection required during the five-year internal pipe inspection?
Yes, leak detection is part of the five-year assessment per NFPA 25 for corrosion and obstruction.

Do you inspect jockey pumps for leaks or pressure loss?
Yes, jockey pumps are included in our leak and pressure system assessments.

Can a leak in the main riser affect the entire system?
Yes, riser leaks reduce system pressure and can impair suppression throughout all zones.

Do sprinkler systems need to be drained to check for leaks?
Not always. Many leak detection tests can be performed under normal system pressure.

Can seismic events cause leaks in sprinkler systems?
Yes, even minor earthquakes can dislodge pipe joints or bracing, leading to leaks.

Do you test deluge valve systems for leakage?
Yes, deluge systems are inspected for integrity, leaks, and proper valve operation.

Are storage tanks covered under NFPA 25 leak inspection?
Yes, water tanks must be inspected for leaks, corrosion, and proper water level.

Do you test for system air pressure loss in dry pipe systems?
Yes, we test for pressure decay that may indicate small leaks in dry or pre-action systems.

Is leak detection required after system re-activation?
Yes, systems must be tested after being restored from maintenance or repairs.

Can you perform leak testing after a sprinkler head replacement?
Yes, head replacements must be followed by pressure and leak checks.

Do fire codes in BC adopt NFPA 25 directly?
Yes, most BC jurisdictions reference or adopt NFPA 25 as the standard for water-based systems.

Is testing required for wall-mounted hydrants or hose stations?
Yes, NFPA 25 includes these components, which must be leak-free and operational.

Can leaks occur at control valves even when closed?
Yes, packing gland leaks and valve stem corrosion can cause weeping or dripping.

Do you inspect concealed piping above drop ceilings?
Yes, we inspect ceiling voids and concealed runs using thermal and acoustic tools.

Do you perform leak inspections for tenant improvement permits?
Yes, we support TI projects with pre- and post-construction compliance checks.

Do you assist with deficiency corrections related to leaks?
Yes, we help identify root causes of deficiencies and provide re-inspection documentation.

Are annual inspections enough to detect slow leaks?
Not always—slow leaks may go unnoticed between inspections, which is why acoustic testing helps.

Can leak detection be performed on live systems without shutdown?
Yes, in most cases we can test active systems using non-disruptive methods.

Do you test galvanized sprinkler piping for corrosion leaks?
Yes, we assess older galvanized piping, which is prone to internal rust and pinhole leaks.

Do you inspect NFPA-compliant fire water storage cisterns for leaks?
Yes, cisterns and tanks must be checked for structural soundness and leaks.

Can a wet system develop leaks from freeze-thaw cycles?
Yes, even minor freezing can crack fittings and lead to slow leaks or full ruptures.

Do you inspect riser rooms for water damage caused by undetected leaks?
Yes, we inspect surrounding areas for signs of leakage or wall/floor saturation.

Do you test systems for unauthorized shutoff or tampering?
Yes, tamper switches and main control valves are inspected per NFPA guidelines.

Can a leaking pressure gauge affect system performance?
Yes, faulty gauges may give false readings and delay detection of real issues.

Do leaks around test drains or inspector’s test valves affect NFPA compliance?
Yes, these must remain leak-free and operational at all times.

Do you provide visual and acoustic leak detection?
Yes, we use both technologies depending on location, pipe material, and accessibility.

Do you work with fire alarm companies to coordinate leak inspections?
Yes, we collaborate with monitoring and alarm contractors during integrated system checks.

Can improperly anchored pipes develop leaks over time?
Yes, vibrations and thermal expansion can loosen improperly supported pipes.

Do you test fire suppression systems in covered parkades?
Yes, we inspect parking garage sprinkler systems for corrosion and leaks.

Do you test for post-construction damage to fire systems?
Yes, we assess systems following renovation, drilling, or ceiling work that may compromise pipes.

Do leaking fire systems impact water supply pressure to other systems?
Yes, significant leaks may draw pressure away from domestic or HVAC water systems.

Can small leaks drain water tanks over time?
Yes, undetected leaks can gradually deplete storage tanks, rendering systems ineffective.

Are corrosion coupons used in leak prevention?
Yes, we can inspect corrosion coupons to evaluate internal pipe conditions proactively.

Can underground fire lines leak into building foundations?
Yes, leaks from buried mains can lead to structural damage and flooding in adjacent areas.

Do you perform NFPA 25 leak inspections in public housing units?
Yes, we provide full service for municipal and subsidized housing providers.

Can you perform testing while the building is occupied?
Yes, most of our detection methods are non-invasive and safe during regular operation.

Do you inspect pipe hangers for strain or displacement?
Yes, mechanical strain contributes to joint fatigue and eventual leaks.

Can ceiling stains indicate fire system leaks above?
Yes, spotting, bubbling paint, or wet ceiling tiles may signal active leaks in piping overhead.

Do leaks occur more often in low-usage systems?
Yes, systems with stagnant water are more prone to corrosion and slow decay.

Do you provide bilingual inspection documentation?
Yes, we offer documentation in English and French, and other languages upon request.

Can fire sprinkler leaks cause ceiling collapse in commercial spaces?
Yes, accumulated water from slow leaks can saturate drywall or tiles and cause collapse.

Do you inspect systems with anti-freeze loops or glycol additives?
Yes, we test chemical-laced water systems used in cold climates for leaks and proper ratios.

Are low-pressure alarms tested during your inspections?
Yes, pressure switches and alarms are tested as part of system leak integrity.

Can even minor leaks trip a monitored fire alarm system?
Yes, slow drops in pressure can trigger supervisory alarms and cause nuisance dispatches.

Do you inspect freezer room or cold storage fire lines for leaks?
Yes, we inspect specially rated piping used in frozen or refrigerated spaces.

Do you inspect for trapped air pockets that could cause system issues?
Yes, air entrapment can lead to false alarms or slow system response—venting is verified.

Can you assist in preparing fire system records for audits?
Yes, we maintain digital inspection logs for NFPA audit and fire department review.

Are quarterly leak inspections required in BC?
Quarterly inspections are not mandatory for all systems, but high-risk buildings may require them by bylaw or insurer.

Do you inspect diesel fire pump enclosures for fluid leaks?
Yes, we check for water and fuel leaks in pump enclosures per NFPA and manufacturer specs.

Do you support engineering assessments for major system overhauls?
Yes, we provide baseline leak detection and data for engineering redesign or upgrades.

Do you test specialty nozzles and deluge valves in labs or server rooms?
Yes, we test water mist, deluge, and specialized suppression systems for critical infrastructure.

Can your inspection uncover improper system drainage?
Yes, retained water due to improper slope or blocked drains can lead to corrosion and leaks.

Can you test private fire mains that connect multiple buildings?
Yes, campus-style properties and multi-building sites often require mainline leak detection.

Do you inspect pre-action systems in museums or data centres?
Yes, pre-action systems demand precision leak detection to protect high-value assets.

Do fire system leaks often go unnoticed in vacant units?
Yes, unmonitored or unrented units are common sources of undetected sprinkler leakage.

Can you perform acoustic leak detection through concrete?
Yes, we use sensors that detect vibrations through flooring and wall slabs.

Do you inspect building sprinkler headers for signs of weeping?
Yes, horizontal headers are common points of failure from vibration or joint fatigue.

Do you test high-pressure fire systems used in factories or airports?
Yes, high-capacity suppression systems are tested with pressure and flow accuracy.

Do you offer service-level agreements for leak inspection?
Yes, we offer ongoing inspection and leak monitoring contracts for compliance and recordkeeping.

Can you detect intermittent leaks that only appear under high demand?
Yes, we simulate pressure changes to reveal leaks that occur only during surges.

Do you inspect wall-mounted sprinkler cabinets for leakage or damage?
Yes, all components, including hose cabinets and exposed valve boxes, are checked.

Do you work with insurance adjusters after water damage events?
Yes, we document leak sources and system failures after fire or flooding incidents.

Are residential sprinkler systems in condos subject to NFPA 25?
Yes, even small multi-unit residential fire systems must follow NFPA 25 standards.

Can you recommend corrosion prevention methods after a leak is found?
Yes, we advise on water quality testing, pipe replacements, and corrosion inhibitors.

Do you inspect bell drain pipes for signs of backup or leakage?
Yes, fire alarm bell drains and overflow lines are checked for proper discharge and blockage.

Can a zone control valve leak without activating?
Yes, many zone valves leak internally or at packing without triggering flow.

Do you detect leaks behind soundproof or insulated ceilings?
Yes, our tools work through multiple layers, including acoustic tiles and insulation.

Do you offer mock fire inspections to prepare clients?
Yes, we perform dry runs and pre-checks before official fire department inspections.

Are leak tests required after seismic restraint installations?
Yes, after seismic upgrades, testing is needed to ensure bracing hasn’t compromised joints.

Do you inspect fire protection in heritage buildings or converted warehouses?
Yes, we specialize in leak detection in older buildings with retrofitted systems.

Can leaks cause damage to fire-rated assemblies?
Yes, wet firestops or compromised walls can reduce compartmentation and fire resistance.

Do you provide digital copies of all NFPA 25 reports?
Yes, all inspection data and leak results are archived and delivered digitally.

Can fire suppression leaks increase utility costs?
Yes, constant water loss from leaks can lead to elevated water bills.

Do you test pre-action valves for integrity and leak resistance?
Yes, these valves must remain dry and sealed until a fire triggers their release.

Can you monitor buildings year-round for changes in system integrity?
Yes, we offer remote leak monitoring and scheduled on-site testing for ongoing protection.

Book Your NFPA 25 Leak Detection Service Today

Don’t wait for a failed inspection or a costly system failure. Ensure your fire protection system is fully compliant and leak-free with AnyLeak.ca’s NFPA 25-aligned inspection and detection services.

📞 Call Now: +1 (604) 269-5325
📧 Email: info@anyleak.ca
🔗 Schedule Service Online: https://anyleak.ca/contact