Direct Answer
AnyLeak provides leak and moisture detection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
Concrete Slab Scanning Across British Columbia
GPR concrete scanning for every property type, every use case, every BC city — before any drilling, cutting, or coring. Map embedded rebar, post-tension cables, conduit, hydronic loops, and voids non-destructively.
BC-wide serviceStamped reports
The Complete BC Concrete-Scanning Reference
Concrete scanning protects every BC property owner, contractor, engineer, and operator from the highest-cost surprise in slab work — a drill, cut, or core that hits something it shouldn’t. Post-tension cables, live electrical conduit, pressurised water lines, hydronic radiant loops, and structural rebar are all hidden hazards that scanning maps non-destructively in 30-60 minutes per area.
This hub is the complete reference to our concrete-scanning service across British Columbia. We cover every property type from residential basements to high-rise post-tension towers, every common use case from pre-drill clearance to forensic investigation, every scanning technology from GPR to half-cell potential, every major BC city, and every common question and concern. Whether you’re a homeowner planning a basement finish or a property manager scoping a $5M tenant improvement, the right answer is one of the 100 pages linked below.
Need a scan now? Call (604) 269-5325 for a same-week mobilisation and an honest upfront quote. Most scopes complete in a single working day; reports follow on the next business day.
Concrete Scanning by Property Type
20 pages
Service-specific pages for every common BC property type — from residential homes through commercial towers to specialised facilities like data centres, hospitals, and pharmaceutical plants.
Concrete Scanning by Use Case
20 pages
Use-case-specific pages covering the common scenarios where concrete scanning is essential — pre-drill, pre-cut, anchor installation, leak source location, structural assessment, insurance documentation, and more.
Scanning Methods & Technology
15 pages
Technology-specific pages explaining how each non-destructive scanning method works — GPR, electromagnetic locator, ultrasonic, impact-echo, thermal imaging, cover meter, half-cell, and more.
Concrete Scanning by BC City
25 pages
City-specific pages for every major BC market we serve — from Vancouver through the Lower Mainland, Sea-to-Sky, Vancouver Island, Okanagan, and Northern BC.
Concerns, Cost & Practical Guides
20 pages
Practical guides on cost, timing, preparation, report interpretation, and the common decisions every property owner and contractor faces around concrete scanning.
Why Property Owners Across BC Choose AnyLeak for Concrete Scanning
- Since 1999 — over two decades of concrete-scanning experience across the BC commercial, residential, industrial, and institutional spectrum.
- One responsible senior technician on every scan — no apprentices left alone with your slab.
- Comprehensive equipment — GPR (1600 MHz + multiple antennas), EM locator, cover meter, impact-echo, thermal, acoustic, half-cell. We bring the right tool for the job.
- Stamped, written reports — every scan ends with an annotated marked plan, photos, and PDF report your contractor, engineer, or insurer can act on.
- Insurance-friendly documentation — adjusters across BC accept our reports as expert evidence for water-loss, structural, and pre-renovation claims.
- BC-wide coverage — Vancouver, Fraser Valley, Sea-to-Sky, Vancouver Island, Okanagan, Kootenays, Northern BC.
- Stand-by during high-risk drilling — for PT slabs and consequential work we stay on site through initial cores, re-scanning instantly if anything reads anomalously.
- Transparent pricing — itemised quotes, no junk fees, no surprise add-ons. Travel charges quoted upfront when applicable.
Book Your Concrete Scan
Speak with a senior technician about your scope. We’ll quote honestly, mobilise within the week, and produce a report your team can act on the next business day.
Stamped reportsInsurance accepted
A Closer Look at This Service
Water does not negotiate. It moves along the path of least resistance, and every day it moves, the damage grows. The question is not whether to investigate; it is when, and the answer is always sooner rather than later.
Every city in British Columbia presents its own combination of soil, climate, construction stock, and water systems, and detection work has to respect those differences. The plan is built accordingly.
The investigation is a quiet, methodical process. Instruments are calibrated on site, readings are recorded, and the technician explains what each step is looking for. There is no demolition, no noise beyond the instruments, and no mess left behind.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
A fourth mistake is hiring a repair contractor to find the leak. Contractors are paid to repair, and their interest is in the work, not in the precision of the location. An independent detection team has no repair to sell, only an answer to deliver.
What This Costs
Pricing for this service in British Columbia depends on the scope of the investigation: the systems to be tested, the size of the property, and whether the finding is confirmed with a second method. A fixed quote is provided before any work begins, so there are no surprises on the invoice.
Most property-level investigations in British Columbia are quoted as a fixed fee once the situation is understood. The quote covers the technician’s time, the instruments, the investigation, and the written report.
Insurance and Documentation
For BC policyholders, the practical value is speed: the claim starts with the report already in hand, instead of weeks of back-and-forth while the insurer tries to establish what happened.
For BC policyholders, the practical value is speed: the claim starts with the report already in hand, instead of weeks of back-and-forth while the insurer tries to establish what happened.
What the Report Includes
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
The report is written in plain language first and professional language second. Owners read the conclusion and the cause; contractors and adjusters read the method notes and the readings. Both are in the same document.
When to Call
Call before the damage becomes visible if the meter is moving with everything off. That reading is the earliest and cheapest moment to act, and acting early is what makes the repair small.
Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.
How to Prepare the Property
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"We had a roof leak at our warehouse and they were great to work with. They came out quickly and found the problem."
Christo Sypsas
Google Review
Why choose a specialist for Concrete Slab Scanning in BC
Concrete slab scanning uses ground-penetrating radar to map rebar, post-tension cables and embedded conduit before you drill, core or cut — preventing dangerous, costly strikes.
- Leak detection specialists in British Columbia since 1999 — not a plumbing sideline.
- Non-invasive methods first, so access is limited to the leak itself.
- A clear written report you can act on or hand to your insurer.
- Straight answers and up-front pricing — call (604) 269-5325.
Concrete Slab Scanning in BC — common questions
How do I choose the best concrete scanning company in BC?
Look for GPR equipment, trained operators and a clearly marked-up area before any drilling. The whole point is to avoid hitting a post-tension cable or live conduit.
Can you scan before I core or cut a slab?
Yes — that is exactly what slab scanning is for. We mark safe zones and flag rebar, PT cables and embedded services first.
Will scanning find post-tension cables?
Yes. Locating PT cables before drilling is one of the most important reasons to scan, because a strike is both dangerous and expensive.
Specialized Scanning Projects
Purpose-built scanning for the projects driving BC retrofit work right now:
- EV charger installation scanning — parkade coring cleared for PT, rebar and conduit
- Seismic retrofit scanning — as-built verification before anchors and dowels
- Elevator pit & shaft scanning — modernization coring plus pit moisture answers
- Solar racking anchor scanning — PV penetrations on concrete decks, membrane verified after