Direct Answer
AnyLeak provides leak and moisture detection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
BC’s EV transition runs straight through strata parkades: charger circuits need conduit, conduit needs core holes through suspended slabs and walls — and many of those parkades sit under post-tensioned buildings where an uninformed core hole can sever a live PT cable. That mistake is structural, dangerous and spectacularly expensive. AnyLeak.ca scans parkade slabs and walls before EV charger installations across BC, so electrical contractors core with certainty. Since 1999.
Why EV projects need scanning first
- Post-tension cables — common in towers built since the 1970s; severing one is the worst outcome in concrete work; see PT cable detection.
- Existing conduit and feeders — parkade slabs already carry lighting, fire-alarm and service runs; see conduit detection.
- Rebar layout — keeping cores between bars protects the slab and the coring bit; see rebar location.
- Code and permit expectations — municipalities and engineers increasingly expect scan documentation on EV-ready upgrades; see permit-stage scanning.
How an EV-charger scan runs
We scan each proposed core and penetration location with GPR, mark clear zones and embedded hazards directly on the concrete, and document the findings for the electrician, the strata and the engineer of record. Multi-stall projects are scanned in one mobilization — typically faster than the first coring setup. The same visit can route the full conduit path, not just the holes; see parkade scanning.
Who orders it
Electrical contractors bidding EV-ready work; strata councils protecting their structure (see our strata practice); property managers coordinating multi-building rollouts; engineers requiring documented locates before sealing penetration drawings.
FAQ
Our building is woodframe over one concrete level — still needed? Yes: that one suspended parkade slab is exactly where PT and embedded services live.
Can you scan walls for vertical runs? Yes — wall penetrations and vertical chases are scanned the same way.
EV project coring soon? Call (604) 269-5325 for a free phone consult or request an assessment — part of our concrete scanning services.
A Closer Look at This Service
Water follows gravity, the path of least resistance, and the buried corridor it sits in, which is why the stain you see is almost never directly above the leak. Understanding where water travels is the entire basis of professional detection work.
Local knowledge matters because the same symptom can point to completely different causes in different cities. The interview, the property history, and the site conditions are always weighed together before any instrument is deployed.
The investigation is a quiet, methodical process. Instruments are calibrated on site, readings are recorded, and the technician explains what each step is looking for. There is no demolition, no noise beyond the instruments, and no mess left behind.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
The second most common mistake is repairing the symptom. Patching the drywall, repainting the ceiling, or sealing the visible crack does not stop the water; it hides it. The water finds the next weak point, and the pattern repeats.
What This Costs
Pricing for this service in British Columbia depends on the scope of the investigation: the systems to be tested, the size of the property, and whether the finding is confirmed with a second method. A fixed quote is provided before any work begins, so there are no surprises on the invoice.
Pricing for this service in British Columbia depends on the scope of the investigation: the systems to be tested, the size of the property, and whether the finding is confirmed with a second method. A fixed quote is provided before any work begins, so there are no surprises on the invoice.
Insurance and Documentation
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
The report produced after a this investigation investigation is written with insurers in mind. It documents the cause, the extent, the methods used, and the readings taken, so the adjuster has everything needed to process the claim.
What the Report Includes
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
The written report is the deliverable that separates professional detection from a good guess. It includes the confirmed location, the depth where applicable, the readings, the photographs, the methods used, and an interpretation of the cause and contributing factors.
When to Call
Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.
Call when a decision needs documentation: an insurance claim, a real estate transaction, a strata dispute, or a warranty process. Those decisions run on evidence, and the evidence has to exist before the deadline.
How to Prepare the Property
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"Our flat roof developed a leak, and Anyleak responded quickly. They completed a temporary repair right away."
Sorin Silivestru
Google Review