GPR Scanning Leak Detection in Vancouver | AnyLeak

A Closer Look at This Service

Water follows gravity, the path of least resistance, and the buried corridor it sits in, which is why the stain you see is almost never directly above the leak. Understanding where water travels is the entire basis of professional detection work.

Every city in British Columbia presents its own combination of soil, climate, construction stock, and water systems, and detection work has to respect those differences. The plan is built accordingly.

The technician works methodically through the checklist, explaining each step as it happens. Questions are welcome at every stage, and the approach is adjusted when the evidence points in a new direction.

How the Investigation Is Delivered

Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.

• Step 1: Consultation to understand the situation and the history
• Step 2: Site survey and indicator mapping
• Step 3: Testing of the suspected systems with matched methods
• Step 4: Cross-verification of the finding
• Step 5: Marking and documentation
• Step 6: Written, dated report

The most common mistake is waiting: waiting for the stain to dry, waiting for the bill to settle, waiting for the leak to announce itself. Water does not wait, and every week of waiting grows the repair scope.

What This Costs in Vancouver

The comparison that matters is not detection cost versus no cost; it is detection cost versus the cost of an undetected leak. One targeted repair, guided by an exact location, almost always costs less than exploratory work and repeated damage.

Pricing for this service in Vancouver depends on the scope of the investigation: the systems to be tested, the size of the property, and whether the finding is confirmed with a second method. A fixed quote is provided before any work begins, so there are no surprises on the invoice.

Insurance and Documentation

The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.

Insurance claims fail most often because of missing documentation. A dated, photographed, method-by-method report removes that failure point and gives the adjuster a professional document they can rely on.

What the Report Includes

The written report is the deliverable that separates professional detection from a good guess. It includes the confirmed location, the depth where applicable, the readings, the photographs, the methods used, and an interpretation of the cause and contributing factors.

Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.

When to Call

Call before the damage becomes visible if the meter is moving with everything off. That reading is the earliest and cheapest moment to act, and acting early is what makes the repair small.

Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.

How to Prepare the Property

Nothing else needs to be done. The investigation does not require demolition, preparation of the systems, or any work on your part beyond access. Showing up with the history is the whole preparation.

If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.

Common Questions

Is this service non-invasive?

Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.

How accurate is the location?

With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.

Is the report useful for insurance?

Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.

How long does an investigation take?

Most property-level investigations complete within a day, and the written report follows within one to two business days.

Do you repair leaks?

No. Detection and documentation are the service. The report guides the repair contractor to the exact location.

What does this cost?

The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.

Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.