GPR Scanning Leak Detection in Mission | AnyLeak

A Closer Look at This Service

The cost of finding a leak is small compared to the cost of the damage it causes. A month of undetected leaking can wet insulation, rot framing, wash soil, and attract mould in the time it takes to book an inspection.

A city’s building code, its typical construction era, and its soil behaviour all leave their fingerprints on the leaks it produces. Reading those fingerprints is what makes an investigation accurate on the first visit.

A professional investigation does not end with a verbal summary. It ends with a written report, and that report is the point of the exercise: a document that carries the finding, the evidence, and the guidance to the repair.

How the Investigation Is Delivered

Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.

• Step 1: Consultation to understand the situation and the history
• Step 2: Site survey and indicator mapping
• Step 3: Testing of the suspected systems with matched methods
• Step 4: Cross-verification of the finding
• Step 5: Marking and documentation
• Step 6: Written, dated report

The third mistake is assuming the leak is in the same room as the stain. Water travels along structure for surprising distances, and the visible stain is almost never the source. The investigation traces the path before any repair is planned.

What This Costs

The comparison that matters is not detection cost versus no cost; it is detection cost versus the cost of an undetected leak. One targeted repair, guided by an exact location, almost always costs less than exploratory work and repeated damage.

Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.

Insurance and Documentation

The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.

The report produced after a this investigation investigation is written with insurers in mind. It documents the cause, the extent, the methods used, and the readings taken, so the adjuster has everything needed to process the claim.

What the Report Includes

The report is written in plain language first and professional language second. Owners read the conclusion and the cause; contractors and adjusters read the method notes and the readings. Both are in the same document.

The written report is the deliverable that separates professional detection from a good guess. It includes the confirmed location, the depth where applicable, the readings, the photographs, the methods used, and an interpretation of the cause and contributing factors.

When to Call

Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.

Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.

How to Prepare the Property

Nothing else needs to be done. The investigation does not require demolition, preparation of the systems, or any work on your part beyond access. Showing up with the history is the whole preparation.

The best preparation is information: when the issue started, what changed around that time, what the weather did, and what has already been tried. That history is often more valuable than any instrument.

Common Questions

Is this service non-invasive?

Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.

How accurate is the location?

With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.

Is the report useful for insurance?

Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.

How long does an investigation take?

Most property-level investigations complete within a day, and the written report follows within one to two business days.

Do you repair leaks?

No. Detection and documentation are the service. The report guides the repair contractor to the exact location.

What does this cost?

The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.

Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.