GPR Scanning Leak Detection in Dawson Creek | AnyLeak

A Closer Look at This Service

Water follows gravity, the path of least resistance, and the buried corridor it sits in, which is why the stain you see is almost never directly above the leak. Understanding where water travels is the entire basis of professional detection work.

Every city in British Columbia presents its own combination of soil, climate, construction stock, and water systems, and detection work has to respect those differences. The plan is built accordingly.

A professional investigation does not end with a verbal summary. It ends with a written report, and that report is the point of the exercise: a document that carries the finding, the evidence, and the guidance to the repair.

How the Investigation Is Delivered

Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.

• Step 1: Consultation to understand the situation and the history
• Step 2: Site survey and indicator mapping
• Step 3: Testing of the suspected systems with matched methods
• Step 4: Cross-verification of the finding
• Step 5: Marking and documentation
• Step 6: Written, dated report

A fourth mistake is hiring a repair contractor to find the leak. Contractors are paid to repair, and their interest is in the work, not in the precision of the location. An independent detection team has no repair to sell, only an answer to deliver.

What This Costs

Most property-level investigations in British Columbia are quoted as a fixed fee once the situation is understood. The quote covers the technician’s time, the instruments, the investigation, and the written report.

Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.

Insurance and Documentation

The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.

The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.

What the Report Includes

Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.

You keep the report. It documents the finding, the condition at the time of the investigation, and the guidance for the repair, which is useful for warranty, insurance, and future reference.

When to Call

Call when a decision needs documentation: an insurance claim, a real estate transaction, a strata dispute, or a warranty process. Those decisions run on evidence, and the evidence has to exist before the deadline.

Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.

How to Prepare the Property

Nothing else needs to be done. The investigation does not require demolition, preparation of the systems, or any work on your part beyond access. Showing up with the history is the whole preparation.

The best preparation is information: when the issue started, what changed around that time, what the weather did, and what has already been tried. That history is often more valuable than any instrument.

Common Questions

Is this service non-invasive?

Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.

How accurate is the location?

With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.

Is the report useful for insurance?

Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.

How long does an investigation take?

Most property-level investigations complete within a day, and the written report follows within one to two business days.

Do you repair leaks?

No. Detection and documentation are the service. The report guides the repair contractor to the exact location.

What does this cost?

The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.

Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.