Direct Answer
AnyLeak provides condo leak inspection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
Condo roofs work harder than house roofs: flat or low-slope membranes, rooftop amenity terraces, mechanical units, vents and anchor points — every one a penetration. When top-floor suites stain, the strata needs the entry point, not a re-roofing quote for the whole field. AnyLeak.ca pinpoints condo roof leaks, since 1999 — see also our general roof leak detection service.
Condo-specific roof challenges
- Roof-deck amenities — pavers and planters over the membrane, like a podium in the sky.
- Mechanical penetrations — HVAC curbs, vents, conduit sleds.
- Parapets and overflow scuppers wetting the top of walls — overlaps envelope leaks.
- Saturated insulation spreading water laterally before it drips.
Scan first, open second
Drone thermal scanning maps wet insulation across the whole roof safely; electronic testing finds the breach itself; moisture mapping below ties stains to the path. The council receives the breach location plus the saturation extent — exactly what a roofer needs to repair a section instead of guessing, and what the insurer needs in the file.
FAQ
Top-floor stain after every storm — roof or wall? Could be either; thermal patterns and controlled testing separate parapet/wall entries from field leaks.
Can you scan an occupied rooftop terrace? Yes — aerial thermal plus targeted surface testing keeps the amenity open.
Top floor stained? Call (604) 269-5325 or request an assessment.
A Closer Look at This Service
Hidden water is the most common source of expensive damage in British Columbia homes and buildings. It works silently for weeks or months, and by the time it becomes visible, the repair bill is measured in thousands rather than hundreds.
A city’s building code, its typical construction era, and its soil behaviour all leave their fingerprints on the leaks it produces. Reading those fingerprints is what makes an investigation accurate on the first visit.
The investigation is a quiet, methodical process. Instruments are calibrated on site, readings are recorded, and the technician explains what each step is looking for. There is no demolition, no noise beyond the instruments, and no mess left behind.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
A fourth mistake is hiring a repair contractor to find the leak. Contractors are paid to repair, and their interest is in the work, not in the precision of the location. An independent detection team has no repair to sell, only an answer to deliver.
What This Costs
The comparison that matters is not detection cost versus no cost; it is detection cost versus the cost of an undetected leak. One targeted repair, guided by an exact location, almost always costs less than exploratory work and repeated damage.
Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.
Insurance and Documentation
For BC policyholders, the practical value is speed: the claim starts with the report already in hand, instead of weeks of back-and-forth while the insurer tries to establish what happened.
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
What the Report Includes
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
The report is written in plain language first and professional language second. Owners read the conclusion and the cause; contractors and adjusters read the method notes and the readings. Both are in the same document.
When to Call
Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.
Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.
How to Prepare the Property
Nothing else needs to be done. The investigation does not require demolition, preparation of the systems, or any work on your part beyond access. Showing up with the history is the whole preparation.
The best preparation is information: when the issue started, what changed around that time, what the weather did, and what has already been tried. That history is often more valuable than any instrument.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"They fixed my leaking roof in just 1 hour. The guys came to my home the prompt and did a great job."
Anmol Brar
Google Review