Direct Answer
AnyLeak provides leak and moisture detection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
Wall thickness is the vital sign of any steel asset: it tells you how much corrosion has taken and how much margin remains. The measurement itself takes seconds — historically it was the access that cost thousands. AnyLeak.ca performs ultrasonic thickness (UT) measurement by drone across BC: a stabilized UAV places the transducer on the asset, applies couplant automatically, and streams readings live to the ground station.
Capability
- Thickness measurement on metals, plastics and composites
- 4 MHz dual-element transducer with automatic couplant dispensing
- Instrumentation compliant with EN 12668-1 and ISO 16831:2012
- Repeatable, GPS-tagged measurement points for corrosion-rate trending
What it replaces
A single elevated thickness survey traditionally means scaffold erection or rope-access crews, permits, and often a shutdown window. The drone replaces the access, not the measurement — the same class of calibrated instrument, delivered to the surface by air. Typical programs see access costs fall by half or more, and survey time drop from days to hours.
Where BC asset owners use it
- Storage tanks — shell courses and elevated sections, mapped on a grid
- Stacks and chimneys — thickness at elevation without staging
- Bridges and structural steel — members above water or traffic
- Process piping and vessels — elevated runs and racks; for in-service hot assets see high-temperature UT
- Corroded or coated surfaces where couplant-based UT struggles — see EMAT
Reporting your integrity team can use
Each survey delivers measurement locations, values, and comparisons against previous campaigns — clean inputs for corrosion-rate calculations and inspection planning, coordinated with your engineering team. Part of our aerial NDT suite.
FAQ
How does the probe get coupling at height? The payload dispenses couplant gel automatically at each contact point.
Can you repeat the exact points next year? Yes — GPS-tagged locations make campaigns repeatable, which is what turns readings into corrosion rates.
Need thickness numbers at height? Call (604) 269-5325 or request an assessment.
A Closer Look at This Service
The most expensive leak is the one that was never located. Exploratory openings, repeated drywall repairs, and months of a running meter all cost more than a single professional investigation with an exact answer.
A city’s building code, its typical construction era, and its soil behaviour all leave their fingerprints on the leaks it produces. Reading those fingerprints is what makes an investigation accurate on the first visit.
The investigation is a quiet, methodical process. Instruments are calibrated on site, readings are recorded, and the technician explains what each step is looking for. There is no demolition, no noise beyond the instruments, and no mess left behind.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
A fourth mistake is hiring a repair contractor to find the leak. Contractors are paid to repair, and their interest is in the work, not in the precision of the location. An independent detection team has no repair to sell, only an answer to deliver.
What This Costs
The comparison that matters is not detection cost versus no cost; it is detection cost versus the cost of an undetected leak. One targeted repair, guided by an exact location, almost always costs less than exploratory work and repeated damage.
Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.
Insurance and Documentation
The report produced after a this investigation investigation is written with insurers in mind. It documents the cause, the extent, the methods used, and the readings taken, so the adjuster has everything needed to process the claim.
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
What the Report Includes
The written report is the deliverable that separates professional detection from a good guess. It includes the confirmed location, the depth where applicable, the readings, the photographs, the methods used, and an interpretation of the cause and contributing factors.
You keep the report. It documents the finding, the condition at the time of the investigation, and the guidance for the repair, which is useful for warranty, insurance, and future reference.
When to Call
Call before the damage becomes visible if the meter is moving with everything off. That reading is the earliest and cheapest moment to act, and acting early is what makes the repair small.
Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.
How to Prepare the Property
The best preparation is information: when the issue started, what changed around that time, what the weather did, and what has already been tried. That history is often more valuable than any instrument.
Clear access to the meter, the main shut-off, the water heater, and the areas showing indicators speeds the investigation. A cleared path saves the technician’s time, which is your time on the quote.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"We had a roof leak at our warehouse and they were great to work with. They came out quickly and found the problem."
Christo Sypsas
Google Review