GPR Scanning Leak Detection in Burnaby | AnyLeak

A Closer Look at This Service

Hidden water is the most common source of expensive damage in British Columbia homes and buildings. It works silently for weeks or months, and by the time it becomes visible, the repair bill is measured in thousands rather than hundreds.

Local knowledge matters because the same symptom can point to completely different causes in different cities. The interview, the property history, and the site conditions are always weighed together before any instrument is deployed.

A professional investigation does not end with a verbal summary. It ends with a written report, and that report is the point of the exercise: a document that carries the finding, the evidence, and the guidance to the repair.

How the Investigation Is Delivered

Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.

• Step 1: Consultation to understand the situation and the history
• Step 2: Site survey and indicator mapping
• Step 3: Testing of the suspected systems with matched methods
• Step 4: Cross-verification of the finding
• Step 5: Marking and documentation
• Step 6: Written, dated report

The third mistake is assuming the leak is in the same room as the stain. Water travels along structure for surprising distances, and the visible stain is almost never the source. The investigation traces the path before any repair is planned.

What This Costs in Burnaby

Most property-level investigations in Burnaby are quoted as a fixed fee once the situation is understood. The quote covers the technician’s time, the instruments, the investigation, and the written report.

The comparison that matters is not detection cost versus no cost; it is detection cost versus the cost of an undetected leak. One targeted repair, guided by an exact location, almost always costs less than exploratory work and repeated damage.

Insurance and Documentation

The report produced after a this investigation investigation is written with insurers in mind. It documents the cause, the extent, the methods used, and the readings taken, so the adjuster has everything needed to process the claim.

The report produced after a this investigation investigation is written with insurers in mind. It documents the cause, the extent, the methods used, and the readings taken, so the adjuster has everything needed to process the claim.

What the Report Includes

Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.

The report is written in plain language first and professional language second. Owners read the conclusion and the cause; contractors and adjusters read the method notes and the readings. Both are in the same document.

When to Call

Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.

Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.

How to Prepare the Property

Clear access to the meter, the main shut-off, the water heater, and the areas showing indicators speeds the investigation. A cleared path saves the technician’s time, which is your time on the quote.

Nothing else needs to be done. The investigation does not require demolition, preparation of the systems, or any work on your part beyond access. Showing up with the history is the whole preparation.

Common Questions

Is this service non-invasive?

Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.

How accurate is the location?

With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.

Is the report useful for insurance?

Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.

How long does an investigation take?

Most property-level investigations complete within a day, and the written report follows within one to two business days.

Do you repair leaks?

No. Detection and documentation are the service. The report guides the repair contractor to the exact location.

What does this cost?

The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.

Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.