Direct Answer
AnyLeak provides leak and moisture detection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
A high-rise is a vertical network of pressurized pipe — domestic water risers, heating and cooling loops, and branch lines feeding dozens or hundreds of units. When one of those lines leaks, the sound travels through the structure and the water travels down, so the symptom and the source can be many floors apart. AnyLeak.ca uses acoustic leak detection to listen to those systems and pinpoint the leak in an occupied tower.
Why acoustic detection fits towers
Pressurized water escaping a pipe makes a continuous sound that carries along the pipe and the building structure. Sensitive ground microphones and contact sensors let a technician compare the sound at different points and home in on the loudest — the leak. On long vertical runs and looped systems, leak-noise correlation adds two-sensor maths to compute a position between access points, which is ideal where you can’t open the wall at every floor.
Common high-rise and strata scenarios
- Pressurized domestic risers leaking inside shafts and walls
- Heating and cooling loop leaks that drop system pressure
- Branch lines feeding individual units, leaking behind finishes
- Parkade and mechanical-level distribution leaks
Minimal disruption in occupied buildings
Listening is non-destructive. We coordinate access with the property manager or strata council, work quietly in occupied units, and deliver a report that supports cost allocation and insurance claims. For shared commercial and strata systems, accurate pinpointing avoids opening multiple floors on a guess.
Where we work
We serve high-rise and strata buildings across Metro Vancouver, the Lower Mainland, the Fraser Valley, the Sunshine Coast, Vancouver Island and the Okanagan — see all service areas.
Frequently asked questions
Can you find a riser leak without opening every floor? Yes — that is what correlation and acoustic comparison are for; we narrow it to a location before any access is cut.
Do you work after hours when the building is quieter? Quieter conditions can help acoustic work, and we schedule around the building’s needs by appointment.
To arrange high-rise or strata leak detection anywhere in BC, call (604) 269-5325 or request an assessment.
A Closer Look at This Service
The most expensive leak is the one that was never located. Exploratory openings, repeated drywall repairs, and months of a running meter all cost more than a single professional investigation with an exact answer.
A city’s building code, its typical construction era, and its soil behaviour all leave their fingerprints on the leaks it produces. Reading those fingerprints is what makes an investigation accurate on the first visit.
The technician works methodically through the checklist, explaining each step as it happens. Questions are welcome at every stage, and the approach is adjusted when the evidence points in a new direction.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
The most common mistake is waiting: waiting for the stain to dry, waiting for the bill to settle, waiting for the leak to announce itself. Water does not wait, and every week of waiting grows the repair scope.
What This Costs
Pricing for this service in British Columbia depends on the scope of the investigation: the systems to be tested, the size of the property, and whether the finding is confirmed with a second method. A fixed quote is provided before any work begins, so there are no surprises on the invoice.
Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.
Insurance and Documentation
Insurance claims fail most often because of missing documentation. A dated, photographed, method-by-method report removes that failure point and gives the adjuster a professional document they can rely on.
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
What the Report Includes
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
The written report is the deliverable that separates professional detection from a good guess. It includes the confirmed location, the depth where applicable, the readings, the photographs, the methods used, and an interpretation of the cause and contributing factors.
When to Call
Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.
Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.
How to Prepare the Property
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"They fixed my leaking roof in just 1 hour. The guys came to my home the prompt and did a great job."
Anmol Brar
Google Review