Direct Answer
AnyLeak provides leak and moisture detection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
A strata water bill that jumps quarter over quarter is a leak announcement in accounting form — the building is buying water that’s going somewhere unmetered. The question is where: a running fixture in one of a hundred suites, a mechanical-system loss, an irrigation line, or a buried service main. AnyLeak.ca answers it systematically. Since 1999.
The investigation sequence
- Meter behaviour first — overnight low-demand observation: continuous flow means a running leak; stepped isolation (irrigation off, mechanical off, zones valved) narrows which system carries it.
- Outdoor systems next — irrigation zones and yard mains are the most common silent losers on garden complexes.
- Building systems — recirculation loops, risers, tank auto-fills, and slab lines.
- Pinpointing — acoustic, correlation and tracer gas mark the dig or repair spot.
What the council gets
A written finding: the losing system, the located leak, and the estimated loss rate — enough to justify the repair, support any insurance conversation, and (with flow monitoring) make the next spike announce itself in days instead of a billing cycle.
FAQ
How big a loss shows on a bill? A steady drip-level leak hides; bills move when loss runs continuously — which is exactly the kind detection finds fastest.
Sub-metered townhouses? Per-unit meters make isolation even cleaner; see townhouse stratas.
Bill climbing? Call (604) 269-5325 or request an assessment.
A Closer Look at This Service
The cost of finding a leak is small compared to the cost of the damage it causes. A month of undetected leaking can wet insulation, rot framing, wash soil, and attract mould in the time it takes to book an inspection.
The best detection work is done by people who have seen the region’s buildings and buried systems fail in every common way. That experience is what turns a set of readings into a confident, cross-verified answer.
The technician works methodically through the checklist, explaining each step as it happens. Questions are welcome at every stage, and the approach is adjusted when the evidence points in a new direction.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
A fourth mistake is hiring a repair contractor to find the leak. Contractors are paid to repair, and their interest is in the work, not in the precision of the location. An independent detection team has no repair to sell, only an answer to deliver.
What This Costs
Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.
Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.
Insurance and Documentation
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
For BC policyholders, the practical value is speed: the claim starts with the report already in hand, instead of weeks of back-and-forth while the insurer tries to establish what happened.
What the Report Includes
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
When to Call
Call before the damage becomes visible if the meter is moving with everything off. That reading is the earliest and cheapest moment to act, and acting early is what makes the repair small.
Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.
How to Prepare the Property
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
Clear access to the meter, the main shut-off, the water heater, and the areas showing indicators speeds the investigation. A cleared path saves the technician’s time, which is your time on the quote.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"They fixed my leaking roof in just 1 hour. The guys came to my home the prompt and did a great job."
Anmol Brar
Google Review