Direct Answer
AnyLeak provides condo leak inspection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
Half of suspected condo “leaks” aren’t leaks. Cold water lines sweat in warm ceiling spaces, aluminum window frames stream in winter, and thermal bridges grow damp patches on closet walls — all producing real water with no failed pipe anywhere. Treating condensation as a leak wastes repair money; treating a leak as condensation feeds mould. AnyLeak.ca tells the two apart definitively. Since 1999.
Clues it’s condensation
- Seasonal — worst in cold snaps, gone in summer; compare winter pipe issues
- On cold surfaces: window frames, uninsulated pipe runs, exterior-wall corners
- Broad, even dampness rather than a traveling stain
- Tracks indoor humidity — bathrooms, drying laundry, aquariums
Clues it’s a leak
- Grows regardless of season or follows fixture usage — see intermittent leaks
- A defined wet path on thermal imaging leading toward a source
- Moisture readings peaking at a point, not spread evenly across a cold surface
The definitive test
Surface temperature vs dew point, humidity profiling, moisture mapping and — where needed — pressure/flow testing of nearby lines settle it. You get a written diagnosis: the moisture source, and whether the fix is plumbing, ventilation or insulation. Persistent damp with a musty edge? See hidden moisture investigation.
FAQ
Damp closet on an outside wall every January? Classic thermal-bridge condensation — but we confirm before you repaint for the third time.
Mystery moisture? Call (604) 269-5325 or request an assessment.
A Closer Look at This Service
The most expensive leak is the one that was never located. Exploratory openings, repeated drywall repairs, and months of a running meter all cost more than a single professional investigation with an exact answer.
A city’s building code, its typical construction era, and its soil behaviour all leave their fingerprints on the leaks it produces. Reading those fingerprints is what makes an investigation accurate on the first visit.
The technician works methodically through the checklist, explaining each step as it happens. Questions are welcome at every stage, and the approach is adjusted when the evidence points in a new direction.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
The third mistake is assuming the leak is in the same room as the stain. Water travels along structure for surprising distances, and the visible stain is almost never the source. The investigation traces the path before any repair is planned.
What This Costs
Pricing for this service in British Columbia depends on the scope of the investigation: the systems to be tested, the size of the property, and whether the finding is confirmed with a second method. A fixed quote is provided before any work begins, so there are no surprises on the invoice.
Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.
Insurance and Documentation
For BC policyholders, the practical value is speed: the claim starts with the report already in hand, instead of weeks of back-and-forth while the insurer tries to establish what happened.
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
What the Report Includes
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
You keep the report. It documents the finding, the condition at the time of the investigation, and the guidance for the repair, which is useful for warranty, insurance, and future reference.
When to Call
Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.
Call when the indicator is persistent, when it repeats after a repair, or when it is accompanied by a second indicator. A single passing event can be a coincidence; a pattern is a leak.
How to Prepare the Property
Nothing else needs to be done. The investigation does not require demolition, preparation of the systems, or any work on your part beyond access. Showing up with the history is the whole preparation.
Nothing else needs to be done. The investigation does not require demolition, preparation of the systems, or any work on your part beyond access. Showing up with the history is the whole preparation.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"I recently hired AnyLeak for leak repairs on my roof and deck canopy, and I couldn't be happier with the results."
Trevor Houston
Google Review