Direct Answer
AnyLeak provides leak and moisture detection services in Kamloops using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
Kamloops sits on silt-and-clay benches above two rivers in a semi-arid climate with real winters — a combination that breaks pipes and then hides the evidence. Freeze-thaw works on shallow services; expansive silty clays shift with moisture; and the dry surface rarely betrays what’s running underneath. AnyLeak.ca applies ground-penetrating radar and the full underground toolkit across Kamloops. Since 1999.
Radar honesty in Kamloops soils
Here is the straight answer about GPR in clay-silt: penetration is shallower than in sand or rock — and a competent operator says so. In Kamloops we use GPR for what it does reliably in these soils (locating trench lines, shallow services, slab and utility work) and lean harder on acoustic correlation and tracer gas for deep-line pinpointing. The result is the same: one mark, one dig.
Kamloops call-outs we handle
- Freeze-thaw service breaks — winter splits surfacing at spring melt; see cold-weather leak detection.
- Bench-property services — long runs across shifting silt; see water main detection.
- Commercial, institutional and strata mains — see commercial and strata services.
- Slab-on-grade homes — in-slab lines located before any concrete opens; see slab leak detection.
FAQ
Our lawn is sinking in a line — what is that? Often a washed-out trench above a leaking pipe; radar confirms the void and the line in one pass.
Do you serve the whole Thompson region? Kamloops and surrounding communities by appointment — confirmed in the free phone consult.
Nearby: Kelowna · Prince George · hub: Kamloops leak detection. Call (604) 269-5325 or request an assessment.
Related Services
A Closer Look at This Service
Hidden water is the most common source of expensive damage in British Columbia homes and buildings. It works silently for weeks or months, and by the time it becomes visible, the repair bill is measured in thousands rather than hundreds.
The best detection work is done by people who have seen the region’s buildings and buried systems fail in every common way. That experience is what turns a set of readings into a confident, cross-verified answer.
The investigation is a quiet, methodical process. Instruments are calibrated on site, readings are recorded, and the technician explains what each step is looking for. There is no demolition, no noise beyond the instruments, and no mess left behind.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
The second most common mistake is repairing the symptom. Patching the drywall, repainting the ceiling, or sealing the visible crack does not stop the water; it hides it. The water finds the next weak point, and the pattern repeats.
What This Costs in Kamloops
The comparison that matters is not detection cost versus no cost; it is detection cost versus the cost of an undetected leak. One targeted repair, guided by an exact location, almost always costs less than exploratory work and repeated damage.
Every property is different, which is why pricing follows the investigation plan rather than a menu. The free consultation defines the scope, and the fixed quote follows it. What you are quoted is what you pay.
Insurance and Documentation
The report produced after a this investigation investigation is written with insurers in mind. It documents the cause, the extent, the methods used, and the readings taken, so the adjuster has everything needed to process the claim.
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
What the Report Includes
You keep the report. It documents the finding, the condition at the time of the investigation, and the guidance for the repair, which is useful for warranty, insurance, and future reference.
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
When to Call
Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.
Call when a repair contractor cannot find the source. Blind replacement of pipe, membrane, or roofing is expensive, and it fails when the true cause is elsewhere. The investigation answers the question the contractor could not.
How to Prepare the Property
The best preparation is information: when the issue started, what changed around that time, what the weather did, and what has already been tried. That history is often more valuable than any instrument.
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"Our flat roof developed a leak, and Anyleak responded quickly. They completed a temporary repair right away."
Sorin Silivestru
Google Review