Direct Answer
AnyLeak provides leak and moisture detection services in British Columbia using non-invasive methods — acoustic correlation, tracer gas, thermal imaging, and moisture metering — to find leaks without digging or damage. Every inspection includes a written, insurance-ready report. Call (604) 269-5325 for a free phone consult.
🔄 Reviewed and maintained by the AnyLeak team — October 2026. Rated 5 stars by BC customers.
The cheapest main break is the one found while it was still a leak. A proactive leak survey walks the system before anything surfaces: every hydrant and valve sounded, suspect sections logged overnight, anomalies correlated and pinpointed — kilometre by kilometre, on a schedule. AnyLeak.ca runs proactive surveys for BC municipalities, districts and private systems. Since 1999.
How a survey campaign runs
- Plan — zones prioritized by pipe age, material, pressure and break history; routes built from your system maps.
- Listen — systematic hydrant and valve sounding across the route; suspect contacts flagged.
- Log — overnight noise loggers on flagged sections capture minimum-demand hours.
- Pinpoint — correlation plus ground microphone puts a mark on each confirmed leak.
- Report — per-zone findings: leaks located, severity estimates, surveyed kilometres, clean inputs for the repair program.
Why scheduled beats reactive
Waiting for leaks to surface means paying for them twice — first as years of silent loss, then as a road-cut break repair on overtime. Survey programs flip that: small leaks found at the joint-weep stage, repaired on schedule, roads intact. Most BC systems benefit from surveying the full network on a rolling cycle, with high-risk zones annually; pairs naturally with NRW reduction and DMA work.
Beyond municipal systems
The same survey discipline serves campuses, airports, ports and industrial sites with their own distribution networks — see commercial and institutional services — and large stratas with private mains (strata services).
FAQ
How is survey work priced? Typically by surveyed length and zone complexity — ask for a per-kilometre quote in the free phone consult.
Traffic management? Survey points are hydrants and valve boxes — footprint is minimal and coordinated with your operations.
Part of municipal water main leak detection. Book a survey cycle: (604) 269-5325 or request a quote.
A Closer Look at This Service
The cost of finding a leak is small compared to the cost of the damage it causes. A month of undetected leaking can wet insulation, rot framing, wash soil, and attract mould in the time it takes to book an inspection.
The best detection work is done by people who have seen the region’s buildings and buried systems fail in every common way. That experience is what turns a set of readings into a confident, cross-verified answer.
You do not need to prepare anything except access to the relevant areas. The technician will ask where the indicators are, which systems have been worked on, and what the history shows, and the answers shape the plan.
How the Investigation Is Delivered
Every investigation follows the same disciplined sequence: consultation, survey, testing, cross-verification, marking, and documentation. The sequence is deliberate, and each step builds on the last.
- Step 1: Consultation to understand the situation and the history
- Step 2: Site survey and indicator mapping
- Step 3: Testing of the suspected systems with matched methods
- Step 4: Cross-verification of the finding
- Step 5: Marking and documentation
- Step 6: Written, dated report
The most common mistake is waiting: waiting for the stain to dry, waiting for the bill to settle, waiting for the leak to announce itself. Water does not wait, and every week of waiting grows the repair scope.
What This Costs
Pricing for this service in British Columbia depends on the scope of the investigation: the systems to be tested, the size of the property, and whether the finding is confirmed with a second method. A fixed quote is provided before any work begins, so there are no surprises on the invoice.
Most property-level investigations in British Columbia are quoted as a fixed fee once the situation is understood. The quote covers the technician’s time, the instruments, the investigation, and the written report.
Insurance and Documentation
For BC policyholders, the practical value is speed: the claim starts with the report already in hand, instead of weeks of back-and-forth while the insurer tries to establish what happened.
The report also protects the policyholder. When the cause is documented at the time of the loss, there is no later dispute about what was found, when it was found, or what the condition was.
What the Report Includes
The report is written in plain language first and professional language second. Owners read the conclusion and the cause; contractors and adjusters read the method notes and the readings. Both are in the same document.
Reports are dated and structured so that any licensed contractor can take the marked location and proceed directly to the repair. They are also accepted by insurers, engineers, property managers, and, when needed, in dispute processes.
When to Call
Call before the damage becomes visible if the meter is moving with everything off. That reading is the earliest and cheapest moment to act, and acting early is what makes the repair small.
Call when a decision needs documentation: an insurance claim, a real estate transaction, a strata dispute, or a warranty process. Those decisions run on evidence, and the evidence has to exist before the deadline.
How to Prepare the Property
The best preparation is information: when the issue started, what changed around that time, what the weather did, and what has already been tried. That history is often more valuable than any instrument.
If there is an active leak, the priority is containment: shut off the water at the fixture or main if it can be done safely, move valuables away, and photograph the scene. The technician can be guided by phone while en route.
Common Questions
Is this service non-invasive?
Yes. Every method used works from the surface and leaves no marks. Nothing is cut, dug, or permanently marked during the investigation.
How accurate is the location?
With cross-verified methods, locations are typically within a metre or less, and slab locations within inches.
Is the report useful for insurance?
Yes. The report documents the cause, the extent, the methods used, and the readings, structured for claims and engineering review.
How long does an investigation take?
Most property-level investigations complete within a day, and the written report follows within one to two business days.
Do you repair leaks?
No. Detection and documentation are the service. The report guides the repair contractor to the exact location.
What does this cost?
The quote is fixed before work begins, based on the scope defined in the free consultation. What you are quoted is what you pay.
Call (604) 269-5325 or email info@anyleak.ca for a free consultation. The report is dated, documented, and written to the standard insurers and engineers expect.
★★★★★
"I recently hired AnyLeak for leak repairs on my roof and deck canopy, and I couldn't be happier with the results."
Trevor Houston
Google Review